欧美日激情日韩精品嗯,丰满少妇69激情啪啪无,公交车被CAO得合不拢腿

公司新聞

冷再生技術質量檢查要注意什么？

來源：http://m.xintangt.com/ 日期：2023-02-17

一、在開工前負責進行：

1、 Be responsible for:

1)原材料的驗證試驗、配合比設計等標準試驗及定線等測量工作;

1) Verification test of raw materials, standard test such as mix design, and measurement such as alignment;

2)特殊材料或工藝的試驗、研究、論證及報批;

2) Test, research, demonstration and approval of special materials or processes;

3)施工準備情況的自檢;

3) Self-inspection of construction preparation;

4)開工報告完成及報批。

4) Completion and approval of commencement report.

二、在施工過程中負責進行：

2、 Be responsible for:

1.進行工序及工藝過程的試驗檢測控制。糾正不良操作方法，改進和提高落后的工藝水平，控制工程的質量標準。

1. Carry out test, detection and control of process and technological process. Correct the bad operation methods, improve and improve the backward process level, and control the quality standards of the project.

2.記錄整理施工原始記錄。

2. Record and sort out the original construction records.

3.對完工的分項工程或部位進行自檢評定，形成自檢記錄，對自檢合格的工程提交轉序申請報告。

3. Carry out self-inspection assessment on the completed subdivisional works or parts, form self-inspection records, and submit a sequence transfer application report for the works that pass self-inspection.
冷再生機租賃

4.對工程施工過程中出現的各種影響施工和工程質量的情況、問題，及時進行協調、改正和處理。

4. Timely coordinate, correct and deal with various situations and problems that affect the construction and project quality during the construction process.

5.對工程中出現的質量事故負責按規定的程序和要求進行報告處理。

5. Report and handle the quality accidents in the project according to the specified procedures and requirements.

6.負責落實有關方面關于工程施工及質量的要求或指令。

6. Be responsible for implementing the requirements or instructions of relevant parties on project construction and quality.

三、工程竣工后負責進行：

3、 After the completion of the project:

1.對工程進行自檢評定工作。

1. Conduct self-inspection and evaluation of the project.

2.整理竣工資料。

2. Sort out completion data.

3.完成竣工報告。

3. Complete the completion report.

4.負責工程質量責任期內的質量問題處理。

4. Deal with quality problems during the project quality responsibility period.

5.和有關部門對工程進行交(竣)工工程質量鑒定和工程驗收工作。

5. Work with the relevant departments to carry out the quality appraisal and acceptance of the delivered (completed) project.

感謝您的閱讀，此文的文章來源：冷再生機租賃更多的內容和問題請點擊：http://m.xintangt.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for your reading. The source of this article is: For more information and questions about cold regeneration machine leasing, please click: http://m.xintangt.com We will continue to work hard to provide you with services. Thank you for your support!

上一條：道路基層冷再生施工要注意什么？

下一條：銑刨機租賃的分類介紹