行業資訊
路面冷再生機的冷再生技術主要步驟
來源：http://m.xintangt.com/ 日期：2023-07-24
路面冷再生機會使用專用的破碎裝置將老化、損壞的路面進行破碎。這些裝置通常由錘頭或銑刀組成，能夠?qū)⒙访娌牧掀扑槌蛇m當?shù)念w粒大小。
The road surface cold regeneration machine uses a dedicated crushing device to crush the aged and damaged road surface. These devices are usually composed of hammers or milling cutters, which can crush road materials into appropriate particle sizes.
破碎后的路面材料進入冷再生機內的篩分設備，通過振動篩進行精細篩分。這可以將不同尺寸的顆粒分離開來，確保后續處理時能夠得到統一的顆粒大小。
The crushed road surface material enters the screening equipment in the cold regeneration machine and is finely screened through a vibrating screen. This can separate particles of different sizes, ensuring that a uniform particle size can be obtained during subsequent processing.
經過篩分后，顆粒被送入風選裝置進行分離。風選裝置利用風力作用，將顆粒按照重量和密度的不同進行分離。通常，較重的石料會落下，而較輕的瀝青混合物則會被吹走。
After screening, the particles are sent to the air separation device for separation. The air separation device utilizes the action of wind force to separate particles according to their weight and density. Usually, heavier stones will fall, while lighter asphalt mixtures will be blown away.
經過風選分離的路面顆粒再與新材料進行混合。新材料通常是瀝青、膠結料和其他添加劑，以提高路面的性能和穩定性。混合過程通常通過攪拌裝置進行，確保新舊材料充分混合均勻。
The road particles separated by wind separation are then mixed with new materials. New materials are usually asphalt, binders, and other additives to improve the performance and stability of the road surface. The mixing process is usually carried out through a stirring device to ensure that the new and old materials are fully and evenly mixed.
經過混合的材料再由冷再生機租賃進行再鋪設。通常使用攤鋪機或其他相關設備將修復后的材料均勻鋪設在道路上，并通過壓實機進行壓實，使其與原有路面緊密結合。
The mixed materials are then leased by a cold recycling machine for re laying. Usually, a paver or other related equipment is used to evenly lay the repaired material on the road and compact it with a compactor to make it closely bond with the original road surface.
通過以上冷再生技術的步驟，路面冷再生機能夠?qū)⑴f路面材料進行回收再利用，與新材料混合后重新鋪設，實現對路面的修復和更新。更多相關事項就來我們網站咨詢http://m.xintangt.com!
Through the above steps of cold regeneration technology, the road surface cold regeneration machine can recycle and reuse old road surface materials, mix them with new materials, and then lay them again, achieving repair and renewal of the road surface. For more related matters, please come to our website for consultation http://m.xintangt.com !
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：